Detailed Product Description

1.     Construction and Work Principle:

    The device is composed of exhaust airhead, pump head, valve body head, exhaust air piston, pump piston, canister body, pull rod and handle.

   Work principle of inflator is produce two kind of exhaust air and pumping which piston to and fro pumping in canister body, by air valve continuous carry out to and fro, that is, may exhaust air and pumping.

2.     Use Methods:

Will want to like exhaust air or pumpings apparatus, which is connected each other by a latex pipe and inlet valve of inflator or latex pipe of outlet valve. Connection must be tightly firm, will not as a result of leakage or slip when use, after having jointed latex pipe, that is, may push and pull piston to and fro have exhaust air and pumping work.

3.     Attention Items:

a)          Checking connecting points in all jointed end of inflator when use, if loose or not, in case leakage air.

b)         Pull rod of inflator is only vertical push and pull, may not cross direction against bent.

c)          After having finished will be should push to bottom by piston, put it into plastic pocket, and never weigh weight against bent.

d)         After having place for long time, if you feel tightly push and pull when use, may screw off upper end cover on canister body, add it into a little machine oil, that is, may recovery.(may not oiled rubber valve core of inlet and outlet and rubber seal washer in jointed point).